How It's Done
How Do You Build an Oil Platform in the Middle of the Ocean?
The short answer: you don't

Well, the short answer is, you don't. You build the damn thing on land and then figure out how to get it out there.
Take a look at these two photographs. On the left is what we call the jacket. That's the enormous steel framework that will eventually stand on the ocean floor. Some of these things are taller than a 30-story building and weigh thousands of tons. On the right is the topside. That's where all the machinery, drilling equipment, processing facilities, and living quarters go. It's essentially a floating factory until somebody figures out how to get it onto the jacket.
Both are built in enormous fabrication yards, often with hundreds of welders, fitters, electricians, engineers, and other craftsmen working on them. Once they're finished, we don't just pick them up and put them on a boat. They're slid onto massive transportation barges using hydraulic jacks and specially constructed skidways. And believe me, sliding thousands of tons of steel onto a floating barge is quite an operation all by itself.
Now comes the interesting part. Depending on the size of the load and the conditions, it may take four or five powerful ocean-going tugboats to get that monster out to its destination. Picture an enormous barge carrying a steel structure taller than a skyscraper being hauled across hundreds of miles of open ocean. And all the while, everybody is keeping a very close eye on the weather. The ocean doesn't particularly care what your construction schedule says.
Now, these guys aren't just towing this monster out into the ocean looking for a good place to drop it. They know exactly where it's going. Geologists have already discovered an enormous oil field thousands of feet beneath the seabed, and engineers have determined precisely where the platform needs to stand.
When the barge finally arrives, the real fun begins. The jacket is launched off the barge into the water, carefully rotated upright, and lowered onto the ocean floor. Then enormous steel piles are driven deep into the seabed to hold the whole thing in place. Imagine trying to stand a thousand-ton steel framework upright in the ocean and put it exactly where it's supposed to go.
Then comes the topside. Another transportation barge brings it out, and enormous floating crane barges, some capable of lifting 3,000 to 5,000 tons, pick it up and set it on top of the jacket. Everything has to line up. And remember, we're doing this offshore, where the wind, waves, and weather are part of the job whether we like it or not.
Here's something else most people don't realize. Some of these platforms have 24 or even 48 wells drilled from the same structure. And those wells don't just go straight down. They can angle off in different directions, reaching thousands of feet beneath the ocean floor and spreading out across an enormous underground oil field. Some extend 15,000 feet or more. One platform can reach oil that lies miles away from where it's standing.
Now you've got this enormous steel structure standing in the middle of the ocean, but you still don't have a working oil platform. It can take another six to eighteen months to connect everything, test thousands of pieces of equipment, commission all the systems, and finally bring the whole operation online.
But that is another story.
Want the next one?
Win a signed $66.66 hardcover of my first book, The Shithouse Engineer. Sign up for new stories and you're in the drawing every month. First winner picked December 10. Quit anytime, no hard feelings. (Well, mostly.)


