TGW Publishing HouseTrue stories by Dennis Gilbert
Text
← All stories

Offshore

Deep Sea Diving 450 Feet Down

Five diving systems, 150 divers, and nobody got hurt

Ninian South · North Sea5 min read
Illustration for Deep Sea Diving 450 Feet Down
Illustration created with AI.

When people hear the words “diving job” they picture a guy in a helmet with a welding torch and maybe a shark swimming by. What they don’t picture is what it actually took to put men to work on the bottom of the North Sea, and the biggest diving operation I was ever part of taught me just how much that was.

It was in 1977 and 1978, on Chevron’s Ninian South platform. I had left McDermott and gone to work for John Mackin, whose company was managing the hookup and commissioning for Chevron, and he made me the Construction Supervisor on Ninian South. The jacket had been set on the bottom in about 458 feet of water, and it was held down by 32 piles, eight of them clustered around each of its four legs. To get those piles driven, the jacket had been built with pile guides, big steel collars stacked one above the other about every sixty feet, all the way from the surface down to near the seabed. Once the piles were in, those guides had done their job, and now they were just a problem. Every one of them stuck out into the water, and the currents dragging on all that extra steel would put loads on the jacket that it was never designed to carry, eating into its ability to stand up to the North Sea. So they had to come off, every one of them, from the waterline clear down to 450 feet. That meant divers, and a lot of them. We had three teams working the guides near the surface, two more teams working deeper, and below that, where no diver breathing air from the surface could go, we had two saturation diving systems taking off everything that was left, all the way down near the bottom. By the time it was all running, we had something like 150 divers spread across the barges.

Most people don’t understand saturation diving, so let me explain it the way it was explained to me. When a diver works that deep, his body soaks up the gas he’s breathing, and if he comes up too fast it comes out of his blood like the fizz out of a shaken Coke, and that can cripple or kill him. Decompressing safely from 450 feet takes days. So instead of bringing the divers up after every shift, you never bring them up at all. They live in a steel pressure chamber on the deck of the barge, kept at the same pressure as the bottom of the sea, and they ride down to work and back in a pressurized diving bell. They stay in there for weeks, and only at the very end of the job do they spend days coming slowly back up to normal air. Four men lived in each of our saturation chambers, and it took a team of twelve people on the outside to keep those four men alive. They ran the gas mixtures, watched the pressure around the clock, handled the bell, passed food and supplies in through a little pressure lock, and yes, they even flushed the divers’ toilets for them. I’ll get back to that.

With five diving operations working on one jacket, the biggest danger wasn’t the sea, it was us getting in each other’s way. I was the construction supervisor, and the whole guide removal operation was under me. My job was to coordinate the work: which guides came off, in what order, and which team did what. But I never gave a single order directly to a diver. Each diving superintendent ran his own system and was responsible for his divers, their safety, and making sure the work was done right. So every morning I sat down with the five of them, and we went over everything that was happening on every barge and with every diving team that day. Who was working where, at what depth, and for how long. Which team needed to move, and which one had to wait. Our cranes were the big worry. A crane swinging a load over the side of a barge is bad enough on land, but out there anything that got dropped went into the water and sank straight down toward men working a few hundred feet below, and a diver’s umbilical is the only thing keeping him alive. So no load moved over the water until we knew exactly where every diver was.

Now about those toilets. Nobody in a saturation chamber flushed his own, and every sat diver of that era knew why. Years before our job, around 1969 or the early seventies, an outfit called Taylor Diving and Salvage was doing some of the first deep welding work in the Gulf of Mexico. A diver named Danny Boone was sitting on the toilet in his chamber, at a pressure of about 240 feet of water, reading. The toilets back then had no seats, and they flushed by opening valves to a holding tank that sat at normal surface pressure. Somebody outside opened the wrong valve while he was sitting on it, and the pressure difference took a big part of his intestines right out of his body and into the pipe. You couldn’t bring him up to a hospital, because decompressing from that depth would have taken longer than he had to live. So the company doctor got hold of a surgeon, a man who had operated in field hospitals in Vietnam, and that surgeon climbed into the chamber, was pressurized down to 240 feet himself, and operated on Danny Boone right there in a steel tube on the deck of a barge. The story was that the surgeon said it was the worst thing he ever went through. After that, Taylor put a seat on every chamber toilet, rigged so the flush valve couldn’t open while the seat was down, and the rest of the industry learned the lesson too. That’s how things get learned offshore. Somebody pays the price, and everybody who comes after follows the rule. Danny Boone paid for that one so the rest of us didn’t have to, and on our job, with five diving systems and 150 divers, nobody got hurt. No accidents happened because we were very very careful.

Want the next one?

Win a signed $66.66 hardcover of my first book, The Shithouse Engineer. Sign up for new stories and you're in the drawing every month. First winner picked December 10. Quit anytime, no hard feelings. (Well, mostly.)