TGW Publishing HouseTrue stories by Dennis Gilbert
Text
← All stories

How It's Done

How an Oil Platform Works

Explained for the little old lady from Peoria

On the platform5 min read
Illustration for How an Oil Platform Works
Follow the numbers, 1 through 10. A simplified drawing of the main oil and gas process on a platform.

Folks always ask me what actually happens on one of those oil platforms out in the ocean. So here it is, simple as I can make it. Follow the numbers on the drawing.

1. The stuff that comes up out of the wells isn't nice clean oil. It's a brown soup of oil, natural gas, and salt water all mixed together, and it comes up under a lot of pressure. It shoots into a big tank lying on its side, and inside that tank the pressure is only about one tenth of what it was in the pipe. You know what happens when you pop open a can of soda and it fizzes up? Same thing. The gas that was squeezed into the oil comes busting out in bubbles. A baffle plate near the front calms everything down, and then it just sits there and settles out on its own, the way oil and vinegar separate in a salad dressing bottle. The gas floats to the top, the water sinks to the bottom, and the oil stays in the middle.

2. Near the far end of the tank there's a little dam called a weir. The oil floating on top of the water spills over that dam into its own compartment, and the water can't follow it. From there a big pump grabs the oil and pushes it down the line.

3. That pipeline runs along the bottom of the ocean all the way to shore, where the oil goes on to the refinery to become your gasoline, your heating oil, and about a thousand other things you use every day without thinking about it.

4. The water drains out the bottom of the big tank. But you can't just dump it in the ocean, because there's still a little oil in it. So it goes to what we call the oily water separator, and here's the funny thing, it's nothing fancy at all. It's just a two foot pipe that runs straight down into the ocean about 200 feet. The water goes in, and since oil floats, the oil rises to the top of the pipe while the water works its way on down and out the bottom into the sea. Once there's a thirty or forty foot column of oil built up in the top of that pipe, a pump kicks on and sends it right back to the big process tank to go through the whole thing again. Nothing gets wasted.

5. The gas comes out the top of the big tank. But it's wet. It's carrying water vapor with it, kind of like the air on a muggy August day. Wet gas is no good for running engines, so we have to dry it out.

6 and 7. This is the clever part. The gas goes into the bottom of a tall skinny tower, the gas dryer. Inside, there's a staircase of plates winding around a center pole, and we pump a liquid called glycol, a cousin of the antifreeze in your car, into the top of the tower so it dribbles down from plate to plate like a little waterfall. Now here's the trick. Glycol has an affinity for water. It just plain loves the stuff and soaks it up every chance it gets. So the wet gas has to fight its way up through the tower, going over every one of those plates with glycol dripping down over them, and every plate it passes, the glycol grabs a little more water out of it. By the time the gas gets to the top, it's dry. The glycol, now soggy with all that water, collects at the bottom of the tower and goes to the heater (number 6), which boils the water off just like a teakettle. Out comes nice dry warm glycol, which goes back to its tank and gets pumped right back up to the top of the tower to do it all over again. Round and round it goes, all day, every day.

8. Now the gas is dry and ready to work. Part of it goes to the turbine generators, which make all the electricity for the platform. Remember, a platform is a little town sitting out in the middle of the ocean, with lights, kitchens, air conditioning, pumps, and a hundred or so people living on it, and there's no power company out there to plug into. The flare is that big flame you see burning off the end of a platform in all the pictures. It burns off gas the platform can't use or can't handle right then.

9. A lot of platforms don't want to burn good gas, so they send it to a gas compressor. The compressor squeezes the gas back up to high pressure and pushes it right back down into the reservoir it came from. That keeps the pressure up down there, which helps push more oil up the wells, and it saves the gas for another day.

10. The same goes for the water. Instead of sending it all over the side, a lot of platforms run it through high-pressure water injection pumps and pump it back down into the reservoir too. On Ninian South in the North Sea we had big water injection pumps doing exactly that. The water pushes the oil toward the wells like a broom sweeping a floor.

And that's it. Oil goes to shore, the water goes back to the sea or back down the hole, and the gas keeps the lights on or goes back where it came from. Of course, there are about a gadzillion valves, gauges, and controls I left out, but that's how an oil platform works.

Updated November 2026. Some of the old hands in the Rig Pigs offshore group pointed out a few things I'd left out of my first drawing, so I added them: the weir and baffle inside the separator, gas compression and reinjection (number 9), and water injection (number 10). Thanks, fellas.

Want the next one?

Win a signed $66.66 hardcover of my first book, The Shithouse Engineer. Sign up for new stories and you're in the drawing every month. First winner picked December 10. Quit anytime, no hard feelings. (Well, mostly.)